Fuel Hose Kit Includes:

• (3 ft) 1-1/2" fuel hose
• (5) Hose connectors for 1-1/2" fuel hose
• (10) Stainless steel hose clamp for 1-1/2" fuel hose
• (4) Fuel hose 90 degree elbow for 1-1/2" fuel hose
• 3 (ft) 3/4" Emission fuel hose
• (10) Stainless steel hose clamp for 3/4" fuel hose
• (4) Fuel hose 90 degree elbow for 3/4" fuel hose

INSTALLATION NOTES: CAUTION: Do not have any open flame or heat source close to the installation area.

1. Disconnect the battery cables during installation.

2. The fill and vent tube must have a continuous downward slope from the upper fillneck to the tank or the system will not fill properly. If a sag occurs the tank will not fill properly.

3. Based on your specific needs, use the appropriate the 1 ½” I.D. fill hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless steel hose clamp on each connection. And use plastic ties to hold the hose in place.

4. Based on your specific needs, use the appropriate the 3/4 I.D. vent hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless steel hose clamp on each connection. Use plastic ties to hold vent hose to fill hose.

5. Make sure before filling the tank:

• a. * Fill hose is not kinked.
• b. * Fill vent hose is not kinked or sagging.
• c. * Fill hoses and tube have a continuous downward slope
• d. *Hose clamps are adjusted to avoid leaks
• e. * Hose is not making contact with sharp surfaces

6. Fill the tank with fuel and check for proper operation. If any leakage occurs stop filling and repair the connection.